Pitman Utility Products, Inc.
 Pitman has been and continues to be the leader in product innovation and reliability for the utility and construction industries since its founding in 1950.
In 1957 the Pitman Polecat model was introduced to the utility and telephone industries. This was the original 360 swing digger/derrick. At the same time the Pitman Pelican (the first one-man telescoping aerial device) was also developed. These units became the mainstays of the Pitman product line and met with great success. Throughcontinuous updates and improvements these models remain the preeminent products demanded by leading utility's and contractor's today.
Pitman's unique position in the industry has allowed us to retain and improve our innovative, bold concepts in an ever changing market.
Today Pitman is an exciting and thriving company dedicated to providing our customers with the finest quality equipment to the specifications that they require
Polecat P-Plus Series
|
|
Standard Features
- Cornermount, centermount or rearmount (with rider¹s seat). P60/70 Plus: centermount and rearmount only.
- Controls: full pressure hydraulic.
- High-tensile steel used throughout the unit to provide a high strength-to-weight ratio.
- Two-stage hydraulic-powered steel boom with capacities up to 40,000 lbs.
- Continuous rotation. Planetary drive gearbox with motion control valve.
- Holding valve protection on all hydraulic cyclinders.
- Outriggers with swiveling foot pads and individual controls and isolation kit. P-42 Plus to P-55 Plus: 1 set. P-60 Plus, P-70 Plus: 2 sets.
- Hydraulic foot throttle at operator's station
|
|
Options and Accessories
- Steel or fiberglass 3rd boom, manual or hyraulic extension (P70: 4th boom, manual only).
- Single, 2-speed or 2-speed "shift on-the-fly" auger drives, RH or LH mounting, with side load protection.
- The QuadCommandTM single lever control for rearmount rider's seat. (4-function joystick controller)
- Tilting pole claw assembly, 2nd stage, or transferable to 3rd stage. When installed on hydraulic-powered 3rd boom, includes auto-tilt system.
- 12,000 lb. or 15,000 lb. planetary or worm gear turrent winch, or 12,000 lb. worm gear boom tip winch (boom tip winch on Models P42 Plus to P55 Plus only), with side load protection.
- Manually articulated transformer handling jib, 4-ft. to 10-ft.
- Platforms (1 or 2) at the boom tip; controls at the boom tip.
- Hydraulic overload protection system.
- Digger and auger stow mechanism with hydraulic-powered latch.
- Additional outriggers and controls when required.
- Hydraulic outlets for tools and accessories.
- Other options and accessories are available.
|
 |
Polecat M-Plus Series
|
|
Standard Features
- Cornermount, centermount or rearmount configurations. Rearmount includes optional turret-mounted rider seat.
- Full pressure hydraulic controls.
- High-tensile steel used throughout the unit to provide a high strength-to-weight ratio.
- Two-stage hydraulic-powered steel boom, capacities up to 32,000 lbs.
- 375o non-continuous rotation. Planetary drive gearbox with motion control valve.
- Holding valve protection on all hydraulic cyclinders.
- One set of A-frame outriggers with swiveling foot pads, individual controls and isolation kit (cornermount units supplied with one telescopic swing-out and one telescopic fixed outrigger).
- Foot throttle at operator's station.
|
|
Options and Accessories
- Steel or fiberglass 3rd boom, manual or hyraulic extension.
- Fiberglass boom tip.
- Single, 2-speed and 2-speed shift on demand auger drives, RH or LH mounting, with side load protection.
- Swing-out control console for 180o actuation and raise and lower feature.
- The QuadCommandTM single lever control for rearmount rider's seat.
- Tilting pole claw assembly, 2nd stage, or transferable to 3rd stage. When installed on hydraulic-powered 3rd boom, includes auto-tilt system.
- 12,000 lb. or 15,000 lb. planetary or worm gear turrent winch, or 12,000 lb. worm gear boom tip winch with side load protection.
- Manually articulated transformer handling jib, 4-ft. to 10-ft.
- Platforms (1 or 2) at the boom tip; controls at the boom tip.
- Continuous rotation.
- Hydraulic overload protection system.
- Digger and auger stow mechanism with hydraulic-powered latch.
- Additional outriggers and controls when required.
- Hydraulic outlets for tools and accessories.
- Other options and accessories are available. Consult your dealer.
|
|
|
digger derrick truckss
|
